Turn your continuous business forms into value-added products by adding foil stamping, blind embossing, or foil embossing.

Foil Stamping

The roll of foil is made from pigment and a releasing agent on a Mylar backing. When a heated die is stamped onto the roll of foil, the impression is transferred to the surface beneath.

Blind Embossing

The blind embossing process involves embossing without foil. The design is stamped on either plain paper or printed areas and gives a bas-relief effect. If embossing over a printed area, heat resistant ink must be used.

Foil Embossing

Foil embossing is a combination of the above processes. Foil is combined with embossing to give a new dimension to your business forms.

These services are available on continuous forms only using a Web-Flo Kluge.

Supplied dies must be compatible to our Kluge - essentially an unmounted, 1/4 inch beveled edge die. Magnesium, copper, or brass dies may be purchased. Many different foils are available. Sample books are available on a loan basis to assist in selecting a foil.

Add excitement to your printed projects with foil stamping or embossing.